Product Overview
A major step forward in server design, the next generation Boston Quattro range has been built with the challenges of modern, datacentre, cloud, enterprise, and high performance computing directly in mind. Based on Supermicro’s BigTwin™ server building blocks, this new range offers greatly enhanced performance per watt and per square foot over it’s predecessor.
A major step forward in server design, the next generation *Boston Quattro* range has been built with the challenges of modern, datacentre, cloud, enterprise, and high performance computing directly in mind. Based on Supermicro’s BigTwin™ server building blocks, this new range offers greatly enhanced performance per watt and per square foot over it’s predecessor. Additional features include support for 165W, or even 200W TDP processors infuture generations, 6 x SAS/S-ATA or NVME U.2 devices, up to 24 DIMM’s and 3TB of memory capacity per node; making this the most compelling Quattro yet.
With four dual processor Xeon E5-2600 v3/4 processors in a 2U enclosure, scale out, high density and compute use cases are perfectly aligned with the *Quattro*’s multi-node design. With each node sporting dual PCI-Express x16 low profile add-in card slots, and an additional Supermicro IO Module (SIOM) slot for flexible on board networking options, you can choose from a wide range of Ethernet and Infiniband controllers with speeds from 1Gb/s up to 100Gb/s to match your connectivity requirements exactly.
Up to 6 SAS, S-ATA or even NVME drive support means that whatever your storage and IO requirements, and with hardware RAID options with 2GB Supercapacitor backed cache (SAS/S-ATA Only) you can rest assured knowing you’re protected from unexpected disk failures.
Redundant 2600W power supplies ensure that all nodes can keep running in the event of a PSU failure or loss of a dual feed input, and with Titanium level efficiency (96%) they’re better for energy consumption and the environment than ever before.
Key Features
Up to 4 Dual Intel® Xeon® E5-2600 v4 processor nodes in 2U 24 DDR-4 Registered ECC 2400MHz DIMM slots per node 6 S-ATA/6 SAS3 or 4 NVMe + 2 SAS3 Hot-swap drive bays per node Dual PCI-Express x16 LP Slots + SIOM Up to 3TB of memory capacity per node Processor TDP support of up to 145W
-
Applications
Cloud Computing
Data Center
High Performance Computing
Hyper-Convergence
Virtualisation
-
BIOS Type
128MB SPI Flash with AMI UEFI
-
Buttons
Power On/Off button
System Reset button
UID button
-
Cache
Up to 55MB
-
Certifications
80 Plus Titanium (96%+)
-
Chipset
Intel C612
-
CPU Family
Intel Xeon
-
CPU Manufacturer
Intel
-
CPU Model
E5-2650 v4
-
CPU Socket
Dual Socket R3 (LGA 2011)
-
CPU Speed
2.2 GHz
-
Drive Bays
6 x 2.5" Hot-swap SATA3
-
Error Detection
Corrects single-bit errors
-
Expansion Slots
1 x SIOM card support
2 x PCI-E 3.0 slots (Low-profile)
-
Form Factor
2U
-
HDD's (Installed)
4 x Seagate 2.5" 1TB SATA 6Gb/s 7.2K RPM 128M, 512N (Avenger)
-
Input/Output
1 x RJ45 Dedicated IPMI LAN port
1 x VGA port
2 x USB 3.0 ports (rear)
6 x SATA3 (6Gbps) ports
-
IPMI
Aspeed AST2400 BMC
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Support for Intelligent Platform Management Interface v.2.0
-
LED indicators
2 x Network activity LEDs
HDD activity LED
Power status LED
UID LED
-
Manufacturer
Boston
-
Memory (Installed)
512GB
-
Memory Sizes
8GB
-
Memory Speed
2400MHz
-
Memory Type
DDR4 SDRAM
-
Memory Voltage
1.2V
-
Power Supply
2200W Redundant Power Supplies with PMBus
-
Product Range
Quattro
-
SATA Controller
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
-
System Bus
QPI up to 9.6 GT/s
-
System Cooling
4 x 8cm heavy duty PWM fans
-
Video
ASPEED AST2400 BMC
-
Warranty
3 Years