|
|
Supermicro X7DCA-3
- DDR2 Reg. ECC Xeon uad-Core / Dual-Core SAS Workstation Board
|
1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core,
with 1333 / 1066 MHz FSB
2. Intel® 5100 (San Clemente) Chipset
3. Up to 48GB 667/533MHZ DDR2 ECC
Register SDRAM
4. Intel® Dual 82573V/L Gigabit
Ethernet Controller
5. LSI 1068E 8-Port SAS Controller;
RAID 0, 1, 10
6. 6x SATA2 (3 Gbps) Ports via
ICH9R SB Controller
7. 1 (x16) PCI-e,
1 (x4) PCI-e (using x16 slot),
2x PCI-X 133/100MHz,
2x PCI 33MHz slots
8. High Definition 7.1 Channel Audio
9. Low Profile IPMI 2.0 (SIMLP) Slot
|
|
|
|
|
 |
|
|
|
|
|
|
 |
| MBD-X7DCA-3-O |
- X7DCA-3(Standard Retail Pack)
|
| MBD-X7DCA-3-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 13.05" x 12.075 " (33.15cm x 30.67cm)
|
| |
|
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300
sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
System Bus |
- 1333 / 1066 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory Capacity |
- Six 240-pin DIMM sockets
- Supports up to 48GB 667/533MHz DDR2 ECC Register memory
- Memory must be populated in pairs
|
| Memory Type |
- 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 512MB, 1GB, 2GB, 4GB, 8GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| Chipset |
- Intel® 5100 (San Clemente) chipset
- Intel® ICH9R + PXH-V
|
| SAS |
- LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA |
- Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B)
- (Optional: AOC-SIMLP-3) with 3rd LAN support
- NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
|
| Network Controllers |
- Intel® Dual 82573V/L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- High Definition 7.1 Channel Audio
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SAS |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 4x USB rear ports
- 6x USB internal header
- 10 total USB ports, 2.0 Compliant
|
| Audio |
- High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
| Parallel Port |
- 1x ECP / EEP Parallel Port
|
|
|
|
|
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x4) PCI-e (using x16) slot
|
| PCI-X |
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
| PCI |
- 2x 32-bit 33MHz PCI (5V) slots
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechansim
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
- Internal/External modem remote ring-on
- Suspend to RAM (STR)
|
| |
|
|
| CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
- +5V Standby alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| X7DCA-3 |
MBD-X7DCA-3-O |
1 |
X7DCA-3Motherboard |
| Manual(s) |
MNL-0984
| 1 |
Motherboard Manual for X7DCA-3
|
| I/O Cables |
CBL-022L
CBL-0097L-02
CBL-0044L |
1
2
6 |
ATX Floppy Cable
SAS Cable
2ft. Amphenol, SATA Cable |
| Driver Disk |
CDR-X7 1.31 |
1 |
Version 1.31 CD or later |
| I/O Shield |
MCP-260-74301-ON |
1 |
Motherboard I/O Shield |
|
|
|
Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package. |
**This memory modules are not tested yet |
|